Car & Boat Wax, Polish, Detailing Supplies & More | Collinite

All In

colliniteadmin — Tue, 05 Aug 2025 20:13:12 +0000

Collinite’s new All-In Ceramic Interior Detailer gently cleans all interior automotive surfaces while leaving behind SiO2 protection. This dual-action innovative formula works great on vinyl, plastics, leather, fabrics, navigation screens and rubber. Leaves behind a matte, non greasy finish that helps reduce dust attraction while protecting against stains, salt, UV rays & more.

Directions: 1. Spray detailer liberally into a microfiber towel. 2. Spread product quickly over surface to be cleaned/detailed. 3. Flip towel and wipe dry immediately with dry side of towel. For stronger cleaning on leather, vinyl and plastics, spray product directly onto the surface to be treated. Work in with a fine bristled interior detailing brush if necessary. Always wipe residue with a microfiber towel.

The post All In appeared first on Collinite.

Foamr

colliniteadmin — Tue, 05 Aug 2025 20:12:07 +0000

Collinite’s NEW Foamr is a pH neutral, highly concentrated & versatile shampoo that produces a lasting foam and ultra-rich gloss. This high-sudsing, slick formula safely loosens dirt, grime and scum from your paint work/fiberglass while providing a swirl free finish. Designed for preserving a wax, sealant or ceramic coating. For use on all exterior surfaces including paint, clear coat, chrome, PPF, matte, gel coat, plastic and glass. Designed for both foam cannon and hand/bucket use.

DIRECTIONS: Make sure vehicle/vessel’s surface is cool (not hot) to the touch. Hand/Bucket Use: Mix 1-1.5 oz. per 2 gallons of water. Set hose nozzle to “jet/stream” and spray directly into bucket to create foam. Using desired wash mitt, wash surface thoroughly from top to bottom. Rinse each section with hose/water. *Using a 2nd rinse bucket (clean, cool water) will help clean/loosen debris from mitt between sections. When complete, dry all remaining water from surface with drying towel to prevent water spots. Foam Cannon Use : Mix 3-4 oz into 30 oz of water in cannon reservoir. Shake well to properly distribute soap. Cover entire surface with foam cannon and allow to cling/dwell for 2-4 minutes. Rinse with water.

The post Foamr appeared first on Collinite.

Beadcoat

colliniteadmin — Thu, 01 Feb 2024 02:59:33 +0000

No.100 Beadcoat SiO2 + Graphene Spray Sealant quickly provides ultra-durable hydrophobics + a high gloss, super slick finish to a variety of automotive exterior surfaces. Featuring a functional ceramic-graphene resin structure, this easy-to-use formula provides 6+ months of stand-alone paint protection and UV/detergent-resistant shine. Beadcoat can also be used to enhance & preserve an existing ceramic or graphene coating. Safe for paint, glass, wheels & trim.

Available in 16 fl oz
Average Spread/Coverage: 600-1,000 sq ft

TIPS: Always test product first in a small, inconspicuous area to ensure desired result.
*For optimal bond/protection, ensure surface is free of above-surface contamination; this can be achieved with iron remover + clay process (towel or bar). Below-surface paint imperfections (swirls/ scratches/marring) should be removed by DA Polish (e.g. Collinite’s No. 390)

As a lubricating drying aid: Following a wash-while vehicle surface is still wet-apply 2 sprays of Beadcoat to one 3×3 ft panel at a time. Using a microfiber towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass). *This process is only recommended if a previous base coat of Beadcoat has been applied.

The post Beadcoat appeared first on Collinite.

Insulator Wax

Collinite — Wed, 10 Apr 2019 20:40:48 +0000

A user-friendlier version of the No. 476s paste, No. 845 stands as Collinite’s most legendary product to date. Famous for its versatility, durability and DIY ease of use, “IW” is ideal for both small and large surface area jobs where lasting protection and timely job completion are desired, but hard buffing and frequent reapplication are not practical. Leaves behind carnauba shine and durable polymer coating that preserves finish and shields against the elements; UV, rain, snow, salt, dust, dirt, grime, bugs, staining and more.

Available in 16 fl oz
Average Spread/Coverage: 1,200-2,000 sq ft

TIP: Always test product first in a small, inconspicuous area to ensure desired result.

The post Insulator Wax appeared first on Collinite.

Slickr

colliniteadmin — Thu, 01 Feb 2024 02:58:15 +0000

No. 150 Slickr Ceramic 3 in 1 quickly & easily adds hydrophobic water beading properties + a high gloss, hyper-slick finish to a variety of automotive exterior surfaces. With an SiO2-polymer structure, Slickr excels as both a stand-alone protectant or as a booster applied over any existing wax, sealant or ceramic/graphene coating; enhancing shine & adding protection. Its versatility enables it to also be used as a drying aid, topper, clay lubricant or as a final inspection detailer; removing light dust and smudges. Safe for paint, glass, wheels & trim.

Available in 16 fl oz
Average Spread/Coverage: 600-1,000 sq ft

TIPS: Always test product first in a small, inconspicuous area to ensure desired result.

As a lubricating drying aid: Following a wash-while vehicle surface is still wet-apply 2 sprays of Slickr to one 3×3 ft panel at a time. Using a microfiber towel, wipe entirety of panel until dry. Flip towel as necessary, and change towels as they become saturated. Repeat process on all painted surfaces (and glass).

As a clay lubricant: Apply 2 sprays of Slickr directly onto a Colli-Flex Decon Towel (rubberized side). With minimal pressure, move decon towel over a 3×3 ft panel in a cross-hatch, overlapping pattern. *Apply additional product to the surface in order to maintain slickness/lubrication and to avoid marring. Remove product from panel with a dry microfiber towel. Repeat process on all painted surfaces (and glass).

The post Slickr appeared first on Collinite.

Marine Wax

Collinite — Tue, 07 May 2019 06:24:17 +0000

For those in search of glistening fiberglass and lasting protection without the elbow grease of a paste wax. Easy on, easy off last step wax provides both long-lasting protection to fiberglass, while leaving behind a high gloss shine and durable protective coating that shields all season against weathering; UV, salt spray and more. Ideal for wax-ready large surface area jobs where radiant shine, protective longevity and timely job completion are all paramount.

Application By Hand:

Place 3-4 pea-sized drops of No. 925 onto foam or microfiber applicator pad
Spread evenly in a cross hatch pattern over a section no larger than a 3×3 ft.
Buff off with a microfiber towel folded into sections. Flip towel between sections and change frequently (or as needed) to avoid wax build up in towel’s fibers.
Repeat process on next 3x3ft section

Application By Machine:

Place 4-5 small pea size dots of No.925 onto finishing/waxing pad.
Using a dual action (DA) polisher, set speed between 4000-4800 OPM
Place polisher on gel coat and turn machine on
With very light pressure, spread wax in a cross hatching pattern over a section no larger than 3×3 ft
When No. 925 dries to a haze, remove with a microfiber towel folded into sections. Flip towel between sections and change frequently (or as needed) to avoid wax build up in towel’s fibers.
Repeat process on next 3x3ft section

For exterior marine detailing use
Available in 16 fl oz
Average Spread/Coverage: 1,200-2,000 sq ft

TIP: Always test product first in a small, inconspicuous area to ensure desired result. If oxidation or heavy staining is present, first apply 920 Fiberglass Cleaner.

The post Marine Wax appeared first on Collinite.

Machine Polishing Compound

Collinite — Wed, 20 Jan 2021 02:50:56 +0000

CLICK HERE for No.631-MACHINE GUIDE

A compound + polish in one product, No. 631 cuts quickly to eliminate moderate to heavy defects; oxidation, minor scratches, swirls, stains, and compound haze from fiberglass and gel coat. Fleetcut’s engineered nano abrasives and nourishing oils leave behind a mirror finish while facilitating the easy application of Collinite’s protective wax coatings; improving wax bond, spread and durability. Exclusively for marine detailing. Not designed for use on anodized aluminum, clear coat paint, plastic, or glass.

Available in 16 fl oz
Average Spread/Coverage: 250-500 sq feet

TIP: Always test product first in a small, inconspicuous area to ensure desired result.

The post Machine Polishing Compound appeared first on Collinite.

Metal Wax

Collinite — Mon, 15 Apr 2019 18:52:57 +0000

The post Metal Wax appeared first on Collinite.

Insulator Speed Wax

colliniteadmin — Wed, 01 Nov 2023 12:26:24 +0000

Fast & easy to use, Insulator Speed Wax combines high gloss carnauba shine with Collinite’s legendary polymer durability. Creates a super slick, protective barrier that weather guards for months against contaminants. Can be used as both a gloss booster/protection topper after a Collinite wax coating (No. 845, No. 476s or No. 915), or as a stand-alone wax-sealant protectant. Safe on all exterior painted surfaces and trim. Not for use on rubber or glass.

Available in 16 fl oz
Average Spread/Coverage: 600-1,000 sq ft

TIP: Always test product first in a small, inconspicuous area to ensure desired result.

The post Insulator Speed Wax appeared first on Collinite.

Essential Car Care Kit

colliniteadmin — Mon, 08 Sep 2025 16:34:05 +0000

Kit includes:

No. 83 Foamr Auto Wash Shampoo

No. 21 All In Interior Detailer

No. 845 Insulator Wax

No. 150 Slickr Ceramic Detailer

No. 360 Multi Purpose Dressing

Colli-Flex Super Clay Towel

2 Applicator Pads

3 pack of Microfiber Towels

Deluxe Wash Mitt

The post Essential Car Care Kit appeared first on Collinite.