The Definitive Guide to Collinite 845 Insulator Wax
Collinite 845 is a legendary high-durability liquid carnauba-polymer wax offering 4-7 months of weather protection. The secret to a professional finish is the "Golden Rule"— apply it extremely thin on a surgically clean, decontaminated surface. For the easiest application, liquify the wax in warm water before use until it reaches a milk-like consistency.
Step 1: Surface Preparation & Decontamination
Proper bonding is the difference between a wax that lasts 2 weeks and one that lasts 5 months.
- Thorough Wash: Use No. 83 Foamr pH neutral Auto and Boat Wash Shampoo with a Deluxe Microfiber Wash Mitt to remove loose dirt.
- Chemical & Mechanical Decontamination: If the paint feels rough, use the Colli-Flex Super Decon Clay Towel for fine-grade decontamination. For heavy iron deposits or brake dust, apply a high-quality iron remover before claying.
Step 2: Paint Correction (If Needed)
For light scratches, swirls, or faded paint, apply Collinite 390 Pro Polish using a dual action (DA) polisher and a foam polishing pad. This "levels" the paint, ensuring the wax provides the deepest possible gloss.
Step 3: Applying Collinite 845 Insulator Wax
A. Product Preparation (Viscosity Management)
Because of its high carnauba concentration, 845 may arrive as a thick gel. Place the capped bottle in a bucket of warm-hot water for 5-10 minutes, then shake vigorously until it reaches a thin, milk-like consistency. Shake occasionally during use to maintain this state.
B. Application Technique
- Check Surface Temp: The paint should be lukewarm (55°F to 80°F). Avoid direct sunlight.
- "Thin is King": Apply using a 3x5 microfiber applicator sponge. Use only a couple of small drops per panel. Over-application is the #1 cause of streaking.
- Work in Sections: Apply to a 2x2 ft section at a time. Do not coat the entire vehicle before buffing.
- The Swipe Test: Let the wax haze. Swipe a finger across it; if it comes away clean without an oily trace, it is ready to be buffed off.
Step 4: Removal and Optional Layering
- Buffing: Remove residue using a 16” x 16” edgeless microfiber towel.
- Layering: For maximum durability, a second layer can be applied after 2 hours (ideally 12-24 hours) for "bulletproof" winter protection.
Step 5: Maintenance for a Lasting Shine
To extend the life of your wax, use these "topper" sprays every few washes:
- No. S-845 Insulation Speed Wax: High-gloss sealant topper.
- No. 520 Quick Universal Detailer: For light dust and fingerprints.
- No. 150 Slickr: 3-in-1 ceramic detailer for maximum slickness.
Get the Most Out of Your Wax
To get the most out of Collinite 845, remember the three pillars: Prepare (wash and clay), Liquify (warm the bottle), and Thin (use minimal product). Following this method ensures a mirror-like shine and nearly indestructible protection against UV, salt, and rain for up to 7 months.
Where to Buy Collinite 845
You can find Collinite products at the official shop and through these trusted authorized partners:
- Major Marketplaces:
- Authorized Specialists:
- Or Order From Us: Collinite Official Shop